A universal bandsaw is appraised for general use in various workshops (work on locks, maintenance), at plants with machinery and in field installations. Robust framework of the machine is made of grey cast iron. In contrast to the basic version ARG 130, the feed into cut is performed by the weight of the arm with the possibility of regulating the feed rate by a special system of springs. When the cut is finished the bandsaw drive automatically switches off. For fast cutting of small cross-sections the system of springs can be set for manual feed into cut as well. Mechanical lock of the upper position of the bandsaw arm. Arm uplift is carried out manually.
Workpiece stop – Standard equipment
Simple stop for setting the required length of the material to be cut.
Two-speeds three-phase motor
Three phase motor (400 V) with blade speed of 40 and 80 m/min recommended when full material or thick wall profile material cutting is needed frequently.
Modern concept of the bandsaw arm allows for large cutting ranges in upright and angular cuts.
Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
Simple locking and adjusting of the desired cutting angle on the angle scale.
Maximum cutting accuracy and saw blade service life in this category of bandsaws.
High-precision three-side hardmetal bandsaw guidance.
Manufactured bearing of running wheels, tensioning wheel system and all rotary parts are the same as in big professional machines.
Professional, noiseless and maintenance-free blade drive is provided by an industrial electric motor with worm gearbox.
The machine can be equipped with two types of motors. Single-phase motor (230 V) with universal saw blade speed of 75 m/min. facilitates easy mains connection. Three-phase two-speed motor (400 V) with saw blade speed of 40 and 80 m/min. is suitable for frequent cutting of full sections and thick-walled sections.
The machine is equipped with a 250 mm workpiece stop.
ARG 130 super
Bench bandsaw without cooling.
ARG 130 super TK
Bench bandsaw with cooling. The machine is connected to a complete cooling system with a professional high-performance pump and possibility of regulating the flow on both guiding heads.
ARG 130 super K
Bandsaw with a base and cooling. The machine is connected to a complete cooling system with a professional high-performance pump and possibility of regulating the flow on both guiding heads. Coolant tank is placed in the base of the machine. This version allows you to install conveyors both before and after the cut.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
| ARG 130 super | 90° | +45° | +60° |
|---|---|---|---|
| ● | 130 | 115 | 70 |
| ■ | 130 | 105 | 60 |
| ▬ | 180 × 100 | 115 x 75 | 70 x 60 |
| Main motor | 230 V, 50 Hz, 0,55 kW / 400 V, 50 Hz, 0,37/0,55 kW |
| Pump motor | 230 V, 50 Hz, 0,065 kW / 400 V, 50 Hz, 0,05 kW |
| Saw blade speed | 65 m/min. / 35/65 m/min. |
| Working height vice (with base) | 900 mm |
| Coolant tank | cca 15 l |
| Machine dimensions ARG 130 super | Dimension drawing |
| Machine dimensions ARG 130 super K | Dimension drawing |
| Machine weight | 70 / 77 / 100 kg |
ARG 130 super
